Add-On Boards
Various Boards
Untergruppen
Bipolar Stepper Motor Driver (Mikroelektronika)
The Bipolar Stepper Motor Driver is build around the A3967SLB, a complete microstepping motor driver with built-in translator. It is designed to operate bipolar stepper motors in full-, half-, quarter-, and eighth-step modes.
• Preis: € 22,00
• Bestand: ab Lager sofort verfügbar
MikroBuffer Board (Mikroelektronika)
MikroBuffer is designed to buffer up to seven analog signals using the Microchip MCP6284, a 450 uA, 5 MHz Rail-to-Rail Operational Amplifier.
• Preis: € 12,90
• Bestand: ab Lager sofort verfügbar
MikroBuffer Proto (Mikroelektronika)
MikroBuffer is designed to buffer up to four analog signals using the Microchip MCP6284, a 450 uA, 5 MHz Rail-to-Rail Operational Amplifier.
• Preis: € 10,50
• Bestand: ab Lager sofort verfügbar
MikroDrive (Mikroelektronika)
MikroDrive is a high-current Darlington array board (350mA x 8 - depending on ambient temperature and number of drivers turned on simultaneously), designed to directly connect up to 8 devices to the microcontroller outputs.
• Preis: € 16,30
• Bestand: ab Lager sofort verfügbar
Relay4 Board (Mikroelektronika)
The Relay4 Board, once connected to any MikroElektronika Development Board through the IDC10 connector, converts 4 I/O to 4 separated relays able to switch up to 8A 250VAC devices. The Relay4 Board includes 4 state LED and the ULN2803 driver IC.
• Preis: € 25,60
• Bestand: ab Lager sofort verfügbar
Port Expander Board (Mikroelektronika)
The Port Expander Board is a is a 16-bit I/O expander for all the Mikroelektronika "EasyXXX" development boards. Features SPI clock speeds up to 10 MHz, configurable interrupt source and polarity inversion register.
• Preis: € 12,00
• Bestand: ab Lager sofort verfügbar
Keypad 4x4 Board (Mikroelektronika)
The Keypad 4x4 Board is a 4x4 keypad with flat cable connector build with 16 hi-quality tact switches.
• Preis: € 9,00
• Bestand: ab Lager sofort verfügbar
EasyInput Board (Mikroelektronika)
The EasyInput Board features a hi-quality 8 way dip-switch to easily switch pull-up or pull-down (selectable) up to 8 I/O.
• Preis: € 5,40
• Bestand: ab Lager sofort verfügbar
EasyPull 1K Board (Mikroelektronika)
The EasyPull 1K Board features 8 pull-up/pull-down resistors with 1K values. Pull-up/pull-down selection is done by moving jumpers. The EasyPull can be used to steer a pin to a known state if no input is present.
• Preis: € 4,50
• Bestand: ab Lager sofort verfügbar
EasyPull 10K Board (Mikroelektronika)
The EasyPull 10K Board features 8 pull-up/pull-down resistors with 10K values. Pull-up/pull-down selection is done by moving jumpers. The EasyPull can be used to steer a pin to a known state if no input is present.
• Preis: € 4,50
• Bestand: ab Lager sofort verfügbar
SmartPROTO (Mikroelektronika)
SmartProto is a prototype board designed to easily connect to all the Easy development boards via IDC10 connector. It offers an hi-quality doublesided PCB area with 228 plated through holes.
• Preis: € 4,90
• Bestand: ab Lager sofort verfügbar
EasyPROTO (Mikroelektronika)
EasyProto is a prototype board designed to easily connect any prototype board to all the Mikroe development boards via IDC10 connector.
• Preis: € 5,20
• Bestand: ab Lager sofort verfügbar
EasyTest (Mikroelektronika)
The EasyTEST board has been designed to allow a quick and easy measuring of all the I/O while connected to an external board. The EasyTest is also useful to connect two different extra boards to the same I/O connector.
• Preis: € 5,50
• Bestand: ab Lager sofort verfügbar
SmartAdapt Mini (Mikroelektronika)
The SmartAdapt Mini is a single I/O port matrix adapter. With the on board jumper matrix is possible to reconfigure the whole I/O port.
• Preis: € 8,60
• Bestand: ab Lager sofort verfügbar
SmartADAPT (Mikroelektronika)
The SmartAdapt is a single I/O port matrix adapter with selectable input voltage. With the on board jumper matrix is possible to reconfigure the whole I/O port and to select the input voltage.
• Preis: € 12,00
• Bestand: ab Lager sofort verfügbar
SmartADAPT2 (Mikroelektronika)
The SmartAdapt2 is a double I/O ports matrix adapter with selectable input voltage. With the on board jumper matrix is possible to reconfigure the two I/O port and to select the input voltage.
• Preis: € 11,10
• Bestand: ab Lager sofort verfügbar
SmartADAPT2-GLCD/LCD (Mikroelektronika)
The SmartAdapt2-GLCD/LCD is a double I/O ports matrix adapter with selectable input voltage and GLCD/LCD socket. With the on board jumper matrix is possible to reconfigure the two I/O port and to select the input voltage.
• Preis: € 14,00
• Bestand: ab Lager sofort verfügbar
EasyConnect (Mikroelektronika)
The EasyConnect is designed to offer 10 screw-terminated connectors (step 5 mm) for connecting cables to up to 8 I/O and VCC/Ground.
• Preis: € 4,60
• Bestand: ab Lager sofort verfügbar
Proto Connect (Mikroelektronika)
The Proto Connect is designed to offer 8 screw-terminated connectors (step 5 mm) for connecting cables to up to 8 I/O.
• Preis: € 3,70
• Bestand: ab Lager sofort verfügbar
Proto Connect 2 (Mikroelektronika)
The Proto Connect 2 is designed to offer 2 screw-terminated connectors (step 5 mm) for connecting cables to up to 2 I/O and/or VCC/Ground.
• Preis: € 2,50
• Bestand: ab Lager sofort verfügbar
EasyConnect 2 (Mikroelektronika)
The EasyConnect 2 is designed to offer 10 screw-terminated connectors (step 2,54 mm) for connecting cables to up to 8 I/O and VCC/Ground.
• Preis: € 4,90
• Bestand: ab Lager sofort verfügbar
FlatCable1 (Mikroelektronika)
FlatCable1 is a hi-quality flat cable with two IDC10 connectors, designed to connect all the optional boards to the Mikroelektronika development systems.
• Preis: € 2,90
• Bestand: ab Lager sofort verfügbar
Wire Jumpers Female to Female (set of 10) (Mikroelektronika)
Set of 10 Wire Jumper cables, 15cm length, Female/Female connectors.
• Preis: € 3,00
• Bestand: ab Lager sofort verfügbar
Wire Jumpers Male to Female (set of 10) (Mikroelektronika)
Set of 10 Wire Jumper cables, 15cm length, Male/Female connectors.
• Preis: € 3,00
• Bestand: ab Lager sofort verfügbar
Wire Jumpers Male to Male (set of 10) (Mikroelektronika)
Set of 10 Wire Jumper cables, 15cm length, Male/Male connectors.
• Preis: € 3,00
• Bestand: ab Lager sofort verfügbar
Sprache
Warenkorb
Ihr Warenkorb ist leer.
Offene Fragen?
Klicken Sie hier für unsere F.A.Q. oder kontaktieren Sie uns über unser Kontakt Formular.
Social Media
Newsletter
Abonnieren Sie unseren kostenlosen Newsletter und erfahren Sie mehr über neue Produkte und aktuelle Angebote.Versand und Zahlung
Zahlungsarten
Wir akzeptieren die Zahlung mit den Kreditkarten VISA und Mastercard ebenso wie PayPal und Banküberweisung. Aus Sicherheitsgründen werden Kreditkartenzahlungen über Wirecard (PSP) durchgeführt.
Versand
Der Versand erfolgt über unsere Partner DHL und FEDEX (versicherter Versand). Die Versandkosten entnehmen Sie bitte hier.
Preis
Alle Preise verstehen sich exkl. der gesetzlichen Mwst (20%) und zzgl. der Versandkosten. Die Mehrwertsteuer entfällt bei Angabe einer gültigen UID-Nummer.