Embedded Linux
Untergruppen
Aria G25-128 (Acme systems)
Aria G25-128 is a cost-effective System-on-Module (SoM) that features an ARM9 CPU with 400Mhz clock, 128MB DDR2 RAM, Ethernet 10/100 PHY, DC-DC converter, and EMI components integrated on a 8-layers SMD module of just 40x40 mm size.
• Preis: € 24,00
• Bestand: Derzeit nicht auf Lager. Verfügbar 5/7 Tage ab Bestellung.
Aria G25-128-E (Acme systems)
Aria G25-128-E is a cost-effective System-on-Module (SoM) that features an ARM9 CPU with 400Mhz clock, 128MB DDR2 RAM, Ethernet 10/100 PHY, DC-DC converter, and EMI components integrated on a module of just 40x40mm size and extended temperature range.
• Preis: € 29,00
• Bestand: ab Lager sofort verfügbar
Angebot!
Eddy-CPU 2.5 (SystemBase)
Eddy 2.1 CPU is a high-performance embedded CPU module with ARM9 processor, 8MB Flash and 32MB SDRAM. It’s features include 16 bit address and 8 bit data bus interface, Ethernet, 56 GPIO and customized real time embedded Linux, Lemonix.
• Preis: € 75,00
€ 48,00 (Gültig bis 31.12.2013)
• Bestand: ab Lager sofort verfügbar
Aria G25-256 (Acme systems)
Aria G25-256 is a cost-effective System-on-Module (SoM) that features an ARM9 CPU with 400Mhz clock, 256MB DDR2 RAM, Ethernet 10/100 PHY, DC-DC converter, and EMI components integrated on a 8-layers SMD module of just 40x40 mm size.
• Preis: € 29,00
• Bestand: ab Lager sofort verfügbar
Angebot!
Eddy 2.1 DK (SystemBase)
Eddy 2.1 Development Kit provides an easy testing and evaluation environment for Eddy 2.1 applications. The development kit includes all the hardware peripherals supported by the Eddy-CPU, as well as the complete Lemonix software development environment.
• Preis: € 380,00
€ 224,00 (Gültig bis 31.12.2013)
• Bestand: ab Lager sofort verfügbar
Aria uSD4G-Debian (Acme systems)
4GB microSD card with preinstalled Debian distribution for Aria module.
Note: this card contains Open Source code released under GPL licence, so you buy the memory card only not the content that is copyright by SPI.
• Preis: € 12,00
• Bestand: ab Lager sofort verfügbar
Angebot!
Eddy-S4M/PIN 2.1 (SystemBase)
Eddy-S4M/PIN 2.1 is a high-performance embedded device server. This compact-size module supports 3 USB 2.0 ports, 2 RS232 ports, 2 RS485/422 ports, microSD interface, WDT & RTC, up to 34 programmable GPIO pins, and customized real time embedded Linux.
• Preis: € 129,00
€ 75,00 (Gültig bis 31.12.2013)
• Bestand: ab Lager sofort verfügbar
Angebot!
Eddy-S4M/DK 2.1 (SystemBase)
Eddy-S4M/DK provides an easy testing and evaluation environment for Eddy-S4M/PIN 2.1 applications. The development kit includes all the hardware peripherals supported by the Eddy-S4M/PIN, as well as the complete Lemonix software development environment.
• Preis: € 219,00
€ 85,00 (Gültig bis 31.12.2013)
• Bestand: ab Lager sofort verfügbar
Angebot!
MiniPCI Type III (SystemBase)
PCB connector MiniPCI Type III for Eddy-S4M CPU module series
• Preis: € 5,50
€ 3,00 (Gültig bis 31.12.2013)
• Bestand: ab Lager sofort verfügbar
Terra (Acme systems)
Terra is a single board computer based on the Linux Embedded SoM Aria G25 (Atmel ARM9@400MHz, 256MB RAM). The board features 10/100 Ethernet, 3 USB 2.0, bootable micro-SD slot, RTC, I/O connector, and it is easily expandable using the Daisy add-on boards.
• Preis: € 199,00
• Bestand: ab Lager sofort verfügbar
Angebot!
Eddy-S1/DB9 232 (SystemBase)
Eddy-S1/DB9 232 is a high-performance embedded device server. This compact-size module supports RS232 serial interface up to 921.6Kbps (with DB9 connector), and customized real time embedded Linux, Lemonix.
• Preis: € 89,00
€ 52,00 (Gültig bis 31.12.2013)
• Bestand: ab Lager sofort verfügbar
Terra-M (Acme systems)
Terra-M is a single board computer based on the Linux Embedded SoM Aria G25 (Atmel ARM9@400MHz, 256MB RAM). The board features Quectel M95 GSM/GPRS modem, Ethernet, USB 2.0, micro-SD slot, RTC, I/O connector, and 7 slots for the Daisy add-on boards.
• Preis: € 249,00
• Bestand: ab Lager sofort verfügbar
Terra-Combo (Acme systems)
The Terra-Combo is an application kit that combines all the parts needed to develop application based on the Terra Single Board Computer.
• Preis: € 281,80
€ 267,71
• Bestand: klicken Sie hier für Prüfung
Terra-Combo-M (Acme systems)
The Terra-Combo-M is an application kit that combines all the parts needed to develop GSM/GPRS application based on the Terra Single Board Computer.
• Preis: € 337,50
€ 320,62
• Bestand: klicken Sie hier für Prüfung
Angebot!
Eddy-S2M/PIN Combo (SystemBase)
Eddy-S2M/PIN Combo is a high-performance Linux embedded device server. This compact-size module supports 1 USB 2.0 (12Mbps) host, 2 RS485/422 ports, 1 SD/SDIO/MMC card interface, 16 programmable GPIO pins, and customized real time embedded Linux, Lemonix.
• Preis: € 104,00
€ 58,00 (Gültig bis 31.12.2013)
• Bestand: ab Lager sofort verfügbar
FOX Board G20 (Acme systems)
The FOX Board G20 is an Embedded Linux SBC which uses the Netus G20 (Atmel AT91SAM9G20 CPU - ARM9, 400MHz, 64MB SDRAM, 256KB FLASH) core. The FOX G20 includes many on-board peripherals: uSD reader, Ethernet, 2 USB 2.0, RTC, 2 serial ports, and 80 GP I/O.
• Preis: € 139,00
• Bestand: ab Lager sofort verfügbar
CR1220 Lithium battery (Acme systems)
Lithium battery model CR1220 (3V) for the FOX Board G20 RTC circuitry backup.
• Preis: € 3,00
• Bestand: ab Lager sofort verfügbar
uSD-4G-Debian (Acme systems)
4GB microSD card with preinstalled Debian rootfs on ReiserFS filesystem. Note: this card contains Open Source code released under GPL licence, so you buy the memory card only not the content that is copyright by SPI Inc.
• Preis: € 15,00
• Bestand: Derzeit nicht auf Lager. Verfügbar 5/7 Tage ab Bestellung.
Debug Port Interface (Acme systems)
The Debug Port Interface (DPI) is a TTL (3.3V) to USB converter designed to connect the FOX Board G20/LX console port (J10) to a standard USB port, getting full access to the Linux console. The DPI uses a standard FTDI chip to convert from TTL to USB.
• Preis: € 15,00
• Bestand: ab Lager sofort verfügbar
FOX Proto-1 (Acme systems)
The FOX Proto-1 is a high quality fiberglass through-plated PCB with same size of the FOX Board G20. The FOX Proto-1 can be mounted on the top of the FOX Board G20, giving extra space that can be used to add extra components.
• Preis: € 6,00
• Bestand: ab Lager sofort verfügbar
FOX Proto-2 (Acme systems)
The FOX Proto-2 is a high quality fiberglass through-plated PCB with Eurocard size (100x160mm). The FOX Proto-2 can host the FOX Board G20, giving extra space that can be used to add extra components.
• Preis: € 8,00
• Bestand: ab Lager sofort verfügbar
STRIPM2x206MM (Acme systems)
Set (2 pieces) of socket: male, 2x20, pin height 6mm.
• Preis: € 1,00
• Bestand: ab Lager sofort verfügbar
STRIPF2X206MM (Acme systems)
Set (2 pieces) of socket - female - 2x20 - height 0,6mm.
• Preis: € 1,00
• Bestand: ab Lager sofort verfügbar
STRIPM2x2012MM (Acme systems)
Set (2 pieces) of socket: male, 2x20, pin height 12mm.
• Preis: € 1,00
• Bestand: ab Lager sofort verfügbar
FOX Case (Acme systems)
FOX Case is a transparent, stackable plastic enclosure (PVC) designed to hold the Acme Systems Linux FOX Board LX816/832 plus an extra board.
• Preis: € 10,00
• Bestand: ab Lager sofort verfügbar
TUXCase (Acme systems)
TUXCase is a TUX-shaped plastic enclosure designed to hold the Acme Systems Linux FOX Board LX. It is a perfect gadget for all Linux addicted.
• Preis: € 14,00
• Bestand: ab Lager sofort verfügbar
Fox Power Supply (Sunny)
The FOX Power Supply is a wall-type switching power supply with 5V/3A output. Pluggable directly to the FOX board.
• Preis: € 9,90
• Bestand: Derzeit nicht auf Lager. Verfügbar 7 Tage ab Bestellung.
FOX Board G20 Combo (Acme systems)
The FOX Board G20 Combo includes everything you need to build a tiny Embedded Linux Server based on the Netus G20 module. The kit includes: FOX Board G20, uSD 4GB with Debian, Lithium Battery, Debug Port Interface, FOX Case, and power supply.
• Preis: € 197,00
€ 177,30
• Bestand: klicken Sie hier für Prüfung
FOX Board G20 TUX Combo (Acme systems)
The FOX Board G20 TUX Combo offers everything you need to build a TUX-shaped Embedded Linux Server based on the Netus G20 module. The kit includes: FOX Board G20, uSD 4GB Debian, Lithium battery, Debug Port Interface, TUX Case, and power supply.
• Preis: € 195,90
€ 176,31
• Bestand: klicken Sie hier für Prüfung
FOX Board G20 Development Kit (Acme systems)
The FOX Board G20 Development Kit includes all what you need to develop with the FOX G20. The kit includes: FOX Board G20, uSD 4GB with Debian, USB consolle adapter, FOX Proto-2 and connectors, power supply and accessories.
• Preis: € 197,00
€ 177,30
• Bestand: klicken Sie hier für Prüfung
Sprache
Warenkorb
Ihr Warenkorb ist leer.
Offene Fragen?
Klicken Sie hier für unsere F.A.Q. oder kontaktieren Sie uns über unser Kontakt Formular.
Social Media
Newsletter
Abonnieren Sie unseren kostenlosen Newsletter und erfahren Sie mehr über neue Produkte und aktuelle Angebote.Versand und Zahlung
Zahlungsarten
Wir akzeptieren die Zahlung mit den Kreditkarten VISA und Mastercard ebenso wie PayPal und Banküberweisung. Aus Sicherheitsgründen werden Kreditkartenzahlungen über Wirecard (PSP) durchgeführt.
Versand
Der Versand erfolgt über unsere Partner DHL und FEDEX (versicherter Versand). Die Versandkosten entnehmen Sie bitte hier.
Preis
Alle Preise verstehen sich exkl. der gesetzlichen Mwst (20%) und zzgl. der Versandkosten. Die Mehrwertsteuer entfällt bei Angabe einer gültigen UID-Nummer.