Acme systems
DAISY System
Acme Systems product range is focused on low-cost and hi-performance Embedded Linux Devices. Acme Systems’s FOX Board is a “ready-to-run” Embedded Linux System, perfect to create mini WEB servers, network devices, TCP/IP gateways or CPU units for OEM embedded devices. A fully Open Source environment is freely available to build custom kernel images or to develop user applications using standard GNU tools.
Acme systems Produktkategorien
DAISY-1 (Acme systems)
It is plugable over the NetusG20 or FOX G20 board to provides 8 connectors to plug up to 8 or more daisy modules using ribbon flat cables. Each connecgtor is identified with a unique name and has a different set of signals coming from the Atmel CPU.
• Preis: € 15,00
• Bestand: Derzeit nicht auf Lager. Verfügbar 5/7 Tage ab Bestellung.
Flat 20cm (Acme systems)
20cm flat cable with sockets for Daisy wiring
• Preis: € 3,00
• Bestand: ab Lager sofort verfügbar
DAISY-9 (Acme systems)
The Daisy-9 is RS232 interface for DAISY series. Up to 6 modules are pluggable on a single FOX Board G20. Up to 3 modules can have the hardware handshaking enabled with RTS/CTS signals and the other 3 modules have simply the TXD and RXD signals.
• Preis: € 20,00
• Bestand: ab Lager sofort verfügbar
DAISY-10 (Acme systems)
is an isolated interface designed to link the FOX Board G20 with industrial devices equipped on RS485 or RS422 line bus. The board used a Texas Instruments ISO35 chip.
• Preis: € 35,00
• Bestand: ab Lager sofort verfügbar
DAISY-2 (Acme systems)
The Daisy-2 is a ready to use stepper motor controller that expose all the function provided by the DRV8811 chip and add also a Low-Power function.
• Preis: € 35,00
• Bestand: ab Lager sofort verfügbar
DAISY-4 (Acme systems)
The DAISY-4 module allows FOX Board G20 or Bee Board to control larger loads and devices. Up to 8 Daisy-4 modules can be wired using an unique flat cable.
• Preis: € 18,00
• Bestand: ab Lager sofort verfügbar
DAISY-5 (Acme systems)
The DAISY-5 is module intended for educational and experimental purpose with 8 push-buttons. Up to 2 DAISY-5 modules are pluggable on a single FOX Board G20 trough a DAISY-1 adapter.
• Preis: € 10,00
• Bestand: ab Lager sofort verfügbar
DAISY-11 (Acme systems)
The DAISY-11 is module intended for educational and experimental purpose with 8 red led. Up to 2 DAISY-11 modules are pluggable on a single FOX board G20 trough a DAISY-1 adapter.
• Preis: € 10,00
• Bestand: ab Lager sofort verfügbar
DAISY-22 (Acme systems)
This board is based on a PCF8574 chip, a 8-bit quasi-bidirectional port and an I2C-bus interface with low current consumption and latched outputs with high current drive capability for directly driving LEDs.
• Preis: € 25,00
• Bestand: ab Lager sofort verfügbar
DAISY-12 (Acme systems)
The DAISY-12 is a 40 x 40mm prototyping board with daisy connector and small soldering area to make your daisy application.
• Preis: € 5,00
• Bestand: ab Lager sofort verfügbar
DAISY-13 (Acme systems)
The Daisy-13 module mounts a low power, quad band, GPRS class 10 data modem useful for remote access applications or SMS dispatchers. The Daisy-13 provide only data services (GPRS link, GSM link or SMS).
• Preis: € 55,00
• Bestand: ab Lager sofort verfügbar
DAISY-15 (Acme systems)
The Daisy-15 is a small adapter to wire a 4DSystems 3.2 inch TFT display to the FOX Board G20, FOX Board G20 V2 and BEEBOARD.
• Preis: € 5,00
• Bestand: ab Lager sofort verfügbar
DAISY-16 (Acme systems)
The Daisy-16 is an audio board for FOX. It uses WM8731 audio codec, which is low power stereo codecs with an integrated headphone driver, stereo line-out, stereo line-in and mono microphone level audio inputs.
• Preis: € 35,00
• Bestand: ab Lager sofort verfügbar
DAISY-18 (Acme systems)
The DAISY-18 is a four opto-isolated digital inputs board
• Preis: € 35,00
• Bestand: ab Lager sofort verfügbar
DAISY-19 (Acme systems)
The DAISY-19 with four solid state isolated outputs can drive DC loads. The board is equipped with four leds, one for each output, monitoring the output status. When a led is on, its associated output is active (the MOSFET is conducting).
• Preis: € 35,00
• Bestand: ab Lager sofort verfügbar
DAISY-7 (Acme systems)
The DAISY-7 module with 9DOF digital MEMS accelerometer, gyroscope, magnetometer, barometer and GPS receiver. Communication between the Fox Board / Bee Board and DAISY-7 requires a serial interface and TWI (I2C).
• Preis: € 99,00
• Bestand: ab Lager sofort verfügbar
Sprache
Warenkorb
Ihr Warenkorb ist leer.
Offene Fragen?
Klicken Sie hier für unsere F.A.Q. oder kontaktieren Sie uns über unser Kontakt Formular.
Social Media
Newsletter
Abonnieren Sie unseren kostenlosen Newsletter und erfahren Sie mehr über neue Produkte und aktuelle Angebote.Versand und Zahlung
Zahlungsarten
Wir akzeptieren die Zahlung mit den Kreditkarten VISA und Mastercard ebenso wie PayPal und Banküberweisung. Aus Sicherheitsgründen werden Kreditkartenzahlungen über Wirecard (PSP) durchgeführt.
Versand
Der Versand erfolgt über unsere Partner DHL und FEDEX (versicherter Versand). Die Versandkosten entnehmen Sie bitte hier.
Preis
Alle Preise verstehen sich exkl. der gesetzlichen Mwst (20%) und zzgl. der Versandkosten. Die Mehrwertsteuer entfällt bei Angabe einer gültigen UID-Nummer.